3.3 Loading the Document
3
Di1611/Di2011 3-13
Basic Operations Chapter 3
To position translucent or transparent documents
When copying a highly transparent or translucent document, such as OHP
transparencies, tracing paper or diazo photosensitive paper, position it as
described below.
1 Lift open the Original Cover, or the Document Feeder if it is installed.
2 Position the document to be copied
face down on the Original Glass.
❍ Align the document on the scales
above and to the left of the Original
Glass.
3 Place a blank sheet of paper of the
same size over the document.
4 Carefully close the Original Cover, or the Document Feeder if it is installed.
To Next Page
Loading...
