Minolta Di1611 - To Make Copies Using a Fixed Zoom Setting

5
5.7 Specifying a Zoom Setting
5-32 Di1611/Di2011
Before Making Copies Chapter 5
To make copies using a fixed zoom setting
1 Load the document to be copied.
❍ Refer to “Loading the Document” on page 3-9.
2 Press the [Zoom] key, and then select
the desired zoom ratio.
❍ Each press of the [Zoom] key
changes the zoom ratio as shown
below.
× 1.15 → × 1.41 → × 2.00 → × 0.50
→ × 0.70 → × 0.81 → × 1.00. . .
3 If necessary, specify any other copy settings.
❍ Paper (p. 5-22)
❍ Copy density (p. 5-36)
❍ Advanced Copy Operations (p. 6-1)
4 Using the 10-Key Pad, enter the desired number of copies, and then press the
[Start] key.