Minolta Di1611 - Making Copies on Manually Fed Paper; Paper that Can be Fed Manually

5
5.4 Making Copies on Manually Fed Paper
5-8 Di1611/Di2011
Before Making Copies Chapter 5
5.4 Making Copies on Manually Fed Paper
Manually feed the copy paper if you wish to make copies onto paper not loaded into
any paper tray, or onto special paper, such as OHP transparencies, postcards or
cards.
Paper That Can Be Fed Manually
Paper types:
G Plain or recycled paper (thickness: 60 g/m
2
to 90 g/m
2
)
G Special paper
❍ Cards (thickness: 91 g/m
2
to 157 g/m
2
)
❍ OHP transparencies
❍ Postcards
❍ Label sheets
❍ Envelopes
Paper sizes:
G Maximum: 297 mm × 432 mm
G Minimum: 90 mm × 140 mm
✎
Note
When copying using the Manual Bypass, only one page at a time can be loaded.
For details on the number of pages that can be loaded into the Multiple Bypass
(optional), refer to “Paper Capacity” on page 5-4.