3.2 Loading Paper
3
Di1611/Di2011 3-7
Basic Operations Chapter 3
To load paper into the 2nd Tray
Load paper into the 3rd, 4th and 5th paper trays using the same procedure
described below.
1 Pull out the 2nd Tray.
2 Press down on the Paper-Lifting Plate
until it locks into place.
3 Load the paper into the tray so that the
front side of the paper (the side facing
up when the package was
unwrapped) faces up.
?
Have the necessary precautions
been observed when loading the
paper?
➜ Do not load so much paper that
the top of the stack is higher than
the mark.
Paper-Lifting Plate
To Next Page
Loading...
