Minolta Di1611 - To Set the AUTO Density Level (DENSITY LEVEL(A) Function)

7.6 Specifying Copy Settings
7
Di1611/Di2011 7-43
Utility Mode – Copy Functions Chapter 7
To set the “AUTO” density level (“DENSITY LEVEL(A)” function)
1 Select the “COPY SETTING 1” menu.
❍ Refer to “To select the “COPY
SETTING 1” menu” on page 7-40.
2 Press the [3] key from the 10-Key Pad
to select “DENSITY LEVEL(A)”.
3 Using the and keys, select
one of the three settings between
“LIGHT” and “DARK”, and then press
the [Yes] key.
The “COPY SETTING 1” menu
appears again.