7.6 Specifying Copy Settings
7
Di1611/Di2011 7-49
Utility Mode – Copy Functions Chapter 7
To select the “COPY SETTING 2” menu
1 Press the [Utility] key.
“MACHINE SETTING?” appears.
2 Press the key 5 times to select
“COPY SETTING 2?”.
3 From the 10-Key Pad, press the key for the “COPY SETTING 2” function that
you wish to set.
❍ The “COPY SETTING 2” functions are as follows:
1 MIXED ORIGINAL
2 COPY PRIORITY
3 OUTPUT PRIORITY
4 4IN1 COPY ORDER
5 CRISSCROSS MODE
6 DUPLEX COPY
✎
Tip
If, at any time, you wish to quit setting a “COPY SETTING 2” function, press the
[No] key. When the message “STOP SETTING?” appears, press the [Yes] key
to quit.
To Next Page
Loading...
