Minolta Di1611 - To Copy Onto Envelopes (Non-Standard Size)

4.3 Copying Onto Various Types of Media
4
Di1611/Di2011 4-11
Useful Operations Chapter 4
To copy onto envelopes (non-standard size)
As an example, the following procedure describes how to make copies onto
200 mm × 150 mm envelopes loaded into the Manual Bypass.
✎
Note
When loading non-standard-sized documents and paper, be sure to first
measure their size.
The Document Scales at the edges of the Original Glass are useful for
measuring documents and paper.
1 Position the document(s) to be copied.
❍ Refer to “Loading the Document” on page 3-9.
2 Adjust the paper guides for the
Manual Bypass, and load the
envelopes.
❍ Load the envelopes with the flap
facing up so that the surface to be
printed on faces downward, as
shown in the illustration.
✎
Note
Before loading envelopes, press them down to make sure that all air is
removed, and make sure that the folds of the flaps are firmly pressed.
With the Manual Bypass, only one envelope can be loaded at a time.