Minolta Di1611 - With the Original Glass; To Position Sheet Documents

3.3 Loading the Document
3
Di1611/Di2011 3-11
Basic Operations Chapter 3
With the Original Glass
To position sheet documents
For plain documents or documents that cannot be loaded into the Automatic
Document Feeder, position them as described below.
1 Lift open the Original Cover, or the Document Feeder if it is installed.
2 Position the document to be copied
face down on the Original Glass.
❍ Align the document on the scales
above and to the left of the Original
Glass.
3 Carefully close the Original Cover, or the Automatic Document Feeder if it is
installed.
4 If necessary, specify any other copy settings.
❍ Before Making Copies (p. 5-1)
❍ Advanced Copy Operations (p. 6-1)