Minolta Di1611 - Loading Paper into the Paper Tray; To Load Paper into the 1 St Tray

3.2 Loading Paper
3
Di1611/Di2011 3-5
Basic Operations Chapter 3
Loading Paper Into the Paper Tray
To load paper into the 1st Tray
1 Pull out the 1st Tray.
?
Have the necessary precautions
been observed when pulling out
the tray?
➜ Be careful not to touch the surface
of the Paper Take-up Roller with
your hands.
2 Press down on the Paper-Lifting Plate
until it locks into place.
3 Load the paper into the tray so that the
front side of the paper (the side facing
up when the package was
unwrapped) faces up.
?
Have the necessary precautions
been observed when loading the
paper?
➜ Do not load so much paper that
the top of the stack is higher than
the mark.
Paper Take-up Roller
Paper-Lifting Plate