4
4.3 Copying Onto Various Types of Media
4-6 Di1611/Di2011
Useful Operations Chapter 4
4.3 Copying Onto Various Types of Media
To copy onto OHP transparencies
As an example, the following procedure describes how to make copies onto OHP
transparencies loaded into the 1st Tray.
1 Position the A4-sized document.
❍ Refer to “Loading the Document” on page 3-9.
2 Adjust the paper guides in the 1st
Tray, and load the OHP
transparencies.
❍ Load OHP transparencies in the
same orientation as the document.
✎
Note
A maximum of 20 OHP
transparencies can be loaded.
3 Press the [Utility] key twice.
The “PAPER SOURCE SETUP”
menu appears.
To Next Page
Loading...
