4.2 Using the “Auto/Photo” Function
4
Di1611/Di2011 4-5
Useful Operations Chapter 4
4 Check the setting for the size of paper
to be printed on.
❍ To select either “AUTO” or a
specific paper source, continue
pressing the [Paper] key until the
desired paper size is displayed.
5 If necessary, specify any other copy settings.
❍ Before Making Copies (p. 5-1)
❍ Advanced Copy Operations (p. 6-1)
6 Press the [Start] key.
✎
Note
When making copies using the Manual Bypass, continue loading paper into
the tray.
To Next Page
Loading...
