Minolta Di1611 - To Specify the Automatic Paper Size Detection Units (INCH;METRIC Function)

7
7.3 Setting Up the Paper Sources (“PAPER SOURCE SETUP” Menu)
7-18 Di1611/Di2011
Utility Mode – Copy Functions Chapter 7
To specify the automatic paper size detection units (“INCH/METRIC”
function)
1 Select the “PAPER SOURCE SETUP”
menu.
❍ Refer to “To select the “PAPER
SOURCE SETUP” menu” on
page 7-17.
2 Press the [1] key from the 10-Key Pad
to select “INCH/METRIC”.
3 Using the and keys, select a
paper tray, and then press the [Yes]
key.
4 Using the and keys, select
either “METRIC” or “INCH”, and then
press the [Yes] key.
The “PAPER SOURCE SETUP”
menu appears again.