Minolta Di1611 - To Make Copies Using a Specific Zoom Setting

5.7 Specifying a Zoom Setting
5
Di1611/Di2011 5-33
Before Making Copies Chapter 5
To make copies using a specific zoom setting
1 Load the document to be copied.
❍ Refer to “Loading the Document” on page 3-9.
2 Press the [Zoom] key, and then use
the and keys to specify the
desired zoom ratio.
❍ The zoom ratio is set in 0.01
increments.
3 If necessary, specify any other copy
settings.
❍ Paper (p. 5-22)
❍ Copy density (p. 5-36)
❍ Advanced Copy Operations
(p. 6-1)
4 Using the 10-Key Pad, enter the desired number of copies, and then press the
[Start] key.