Minolta Di1611 - Programmed Copy Jobs; To Store a Copy Program

6
6.7 Programmed Copy Jobs
6-20 Di1611/Di2011
Advanced Copy Operations Chapter 6
6.7 Programmed Copy Jobs
Store up to two of the more frequently used copy setting programs for immediate
recall when necessary.
✎
Note
Copy programs cannot be stored while the machine is warming up or while a
copy job is paused (Interrupt mode).
To store a copy program
1 Select the copy settings to be stored as the copy program.
❍ Before Making Copies (p. 5-1)
❍ Advanced Copy Operations (p. 6-1)
2 Press the [Copy Program] key.
3 Using the and keys, select
“REGIST.”, and then press the [Yes]
key.
4 Using the and keys, select
the program number where you wish
to store the copy program, and then
press the [Yes] key.