3.3 Loading the Document
3
Di1611/Di2011 3-17
Basic Operations Chapter 3
➜ Do not load so many pages that the top of the stack is higher than
the mark.
3 Adjust the Document Guide Plates to
fit the size of the document.
✎
Note
Be sure to load the document
correctly, otherwise the pages
may not be fed in straight.
4 Press the [Original] key twice.
The “Mixed Orig.” indicator lights up.
5 Press the [Auto Paper/Auto Size] key
until the Auto Paper function is
selected.
❍ Check that “AUTO” appears in the
bottom line of the screen.
6 Press the [Start] key.
To Next Page
Loading...
