5
5.4 Making Copies on Manually Fed Paper
5-20 Di1611/Di2011
Before Making Copies Chapter 5
6 Press the [Yes] key.
The PAPER SIZE menu appears.
7 Using the and keys, select
the size of the paper loaded.
❍ If “OHP” was selected in step 5,
select from the following four
paper size settings.
“A4 L”
“A4 C”
“Letter L”
“Letter C”
❍ If paper with a non-standard size is
loaded, press the key
(“CUSTOM”), and then use the 10-
Key Pad to enter the paper size.
(For details, refer to “Copying
Onto Various Types of Media” on
page 4-6.)
?
Do you know the size of FLS
paper?
➜ The default FLS size is 210 mm ×
330 mm. To change the FLS size, contact your service representative.
8 Press the [Yes] key.
The main screen appears.
9 If necessary, specify any other copy settings.
❍ Zoom (p. 5-30)
❍ Copy density (p. 5-36)
❍ Advanced Copy Operations (p. 6-1)
10 Press the [Start] key.
To Next Page
Loading...
