5.7 Specifying a Zoom Setting
5
Di1611/Di2011 5-35
Before Making Copies Chapter 5
4 Using the and keys, select the
desired zoom ratio for the width (Y),
and then press the [Yes] key.
❍ The zoom ratio increases and
decreases in 0.01 increments.
❍ Press the [Zoom] key, and then
select the desired zoom ratio. Each press of the [Zoom] key changes the
zoom ratio as shown below.
× 0.50 → × 0.70 → × 0.81 → × 1.00 → × 0.50 . . .
✎
Tip
Press the [No] key to return to the main screen. To correct the specified
zoom ratio, press the [No] key, and then perform the operation again from
step 2.
5 If necessary, specify any other copy
settings.
❍ Paper (p. 5-22)
❍ Copy density (p. 5-36)
❍ Advanced Copy Operations
(p. 6-1)
6 Using the 10-Key Pad, enter the desired number of copies, and then press the
[Start] key.
To Next Page
Loading...
