6.1 Single-Sided Copies
6
Di1611/Di2011 6-5
Advanced Copy Operations Chapter 6
5 If necessary, specify any other copy settings.
❍ Before Making Copies (p. 5-1)
❍ Advanced Copy Operations (p. 6-1)
6 Using the 10-Key Pad, enter the desired number of copies, and then press the
[Start] key.
❍ The default binding setting is for left-bound books. To copy right-bound
books, change the document type using the “BINDING POS.” function in the
Utility mode (“To set the “BINDING POS.” function” on page 7-45).
There are three Erase settings available.
Erase setting Explanation Finishing
“FRAME” Erase setting The pages are copied with a
blank area framing the text.
“CENTER” Erase setting The pages are copied with a
blank area along the binding.
“BOTH” Erase setting The pages are copied with blank
areas framing the text and along
the binding.
Documents
Copies
Documents
Copies
Documents
Copies
To Next Page
Loading...
