7
7.3 Setting Up the Paper Sources (“PAPER SOURCE SETUP” Menu)
7-20 Di1611/Di2011
Utility Mode – Copy Functions Chapter 7
✎
Note
The paper length is set between
421 mm and 432 mm, the
maximum width that can be set is
279 mm.
The paper width is set between
280 mm and 297 mm, the
maximum length that can be set is
420 mm.
?
Have the necessary precautions been observed when entering the paper
size?
➜ Refer to the diagram at the right
and be sure to specify the paper
width and length measurements
correctly.
6 Using the 10-Key Pad, enter the paper
width (mm).
❍ The paper width can be set
between 90 mm and 297 mm.
❍ If you wish to correct the setting,
press the [No] key, and then enter
the new number.
421 mm to 432 mm
Less than 279 mm
(Width)
(Length)
Less than 420 mm
280 mm to 297mm
(Width)
(Length)
Width (y)
Length (x)
To Next Page
Loading...
