8.1 When the Message “TONER EMPTY” Appears
8
Di1611/Di2011 8-3
Error Messages Chapter 8
2 Swing out the Toner Bottle Holder,
and then remove the toner bottle.
3 Holding the sealed end of the new
toner bottle up, slowly peel off the seal
toward you.
?
Have the necessary precautions
been observed when peeling off
the seal?
➜ Since some toner may spurt out
while the seal is being peeled off,
be sure to peel off the seal slowly.
4 With the side of the toner bottle
marked “UP” facing up, insert the
toner bottle into the Toner Bottle
Holder.
?
Have the necessary precautions
been observed while inserting the
toner bottle?
➜ As shown at the right, the tab on
the toner bottle should securely fit
into the notch in the Toner Bottle
Holder.
5 Lightly tap the bottom of the toner
bottle three or four times.
To Next Page
Loading...
