2.5 Part Names and Their Functions
2
Di1611/Di2011 2-11
Precautions Chapter 2
No. Part Name Description
1 Copy Tray Collects fed-out copies facing down.
2 Front Cover Opened when replacing the toner bottle.
(p. 8-2)
31st Tray • Holds up to 250 sheets of paper.
• The paper size can be adjusted freely.
• Can be loaded with special paper. (p. 7-17)
4 Manual Bypass • Used for manual feeding of paper.
• The paper is fed one sheet at a time.
• Can be loaded with special paper. (p. 5-16)
5 Lock Release Lever Used to open and close the Side Cover.
6 Side Cover Opened when clearing paper misfeeds.
7 Power Switch Used to turn the machine on and off. (p. 2-22)
8 Parallel Interface Connector Used for connecting a parallel cable from the computer.
9 RJ45 Connector for
Networking
Used for connecting the network cable when this machine is
used for Internet faxing and network scanning.
10 Printer USB Connector Used for connecting a USB cable from the computer.
11 Document Scales Used to align the document.
(p. 3-11)
12 Original Cover (optional) Presses down on the document positioned on the Original
Glass.
13 Original Glass When manually feeding a document, position it on the Original
Glass so that it can be scanned.
Position the document face down on the glass. (p. 3-11)
14 Control Panel Used to start copying or to make various settings. (p. 2-17)
To Next Page
Loading...
