2.6 Names of Control Panel Parts and Their Functions
2
Di1611/Di2011 2-19
Precautions Chapter 2
No. Part Name Function
21 Scan key Press to enter Scan mode. The indicator lights up in green to
indicate that the machine is in Scan mode.
(Available only when the Network Interface Card NC-6 and the
Internet Fax & Network Scan Kit SU-6 are installed.)
22 Fax key Does not function on this machine.
23 Copy key Press to enter Copy mode. The indicator lights up in green to
indicate that the machine is in Copy mode.
24 Access key Used with user management. (p. 6-23)
25 Energy Save key Press to enter Energy Save mode. (p. 2-23)
26 Interrupt key Press to enter Interrupt mode. The indicator lights up in green
to indicate that the machine is in Interrupt mode.
Press again to cancel Interrupt mode and return to the mode
before Interrupt mode was entered. (p. 5-38)
27 [123/ABC] key Does not function on this machine.
28 Panel Reset key • Cancels all copy functions and returns them to their default
settings.
• Deletes all queued jobs.
29 Stop key Stops the multi-page copy operation.
30 Start key • Starts copying.
• Queues a copy job if pressed while the machine is warming
up. (p. 2-24)
• The indicator lights up in green to indicate that the machine
is ready to start copying, or it lights up in orange to indicate
that the machine is not ready to start copying.
31 10-Key Pad • Used to specify the number of copies.
• Used to enter setting values.
• The [ ] and [#] keys do not function on this machine.
21 22 23
24
25
26
27
28293031
To Next Page
Loading...
