Contents
vi Di1611/Di2011
To clear the total counts for all accounts ................................. 7-37
7.6 Specifying Copy Settings .......................................................... 7-38
“COPY SETTING 1” & “COPY SETTING 2” menus................. 7-38
To select the “COPY SETTING 1” menu ................................. 7-40
To set the “PAPER PRIORITY” function.................................. 7-41
To set the “DENSITY PRIORITY” function .............................. 7-42
To set the “AUTO” density level
(“DENSITY LEVEL(A)” function) .............................................. 7-43
To set the manual density level
(“DENSITY LEVEL(M)” function) ............................................. 7-44
To set the “BINDING POS.” function ....................................... 7-45
To specify the binding width (“MARGIN SETTING” function) .. 7-46
To specify the erased width (“ERASE SETTING” function) ..... 7-47
To set the “SMALL ORIGINAL” function .................................. 7-48
To select the “COPY SETTING 2” menu ................................. 7-49
To set the “MIXED ORIGINAL” function .................................. 7-50
To set the “COPY PRIORITY” function.................................... 7-51
To specify the default finishing mode
(“OUTPUT PRIORITY” function).............................................. 7-52
To set the “4IN1 COPY ORDER” function ............................... 7-53
To set the “CRISSCROSS MODE” function ............................ 7-54
To set the “DUPLEX COPY” function ...................................... 7-55
8 Error Messages
8.1 When the Message “TONER EMPTY” Appears ......................... 8-2
To replace the toner bottle ......................................................... 8-2
8.2 When the Message “PAPER JAM” Appears .............................. 8-5
To clear a paper misfeed in the Duplex Unit.............................. 8-5
To clear a paper misfeed in the main unit or 1st Tray................ 8-6
To clear a paper misfeed in the Paper Feed Unit .................... 8-10
To clear a paper misfeed in the Multiple Bypass ..................... 8-11
8.3 When the Message “ORIGINAL DOC.JAM” Appears .............. 8-13
To clear a misfeed in the Automatic Document Feeder
(AF-12)..................................................................................... 8-13
To clear a misfeed in the Duplexing Document Feeder
(AFR-19) .................................................................................. 8-16
8.4 Main Error Messages and Their Remedies .............................. 8-18
To Next Page
Loading...
