4.3 Copying Onto Various Types of Media
4
Di1611/Di2011 4-13
Useful Operations Chapter 4
✎
Tip
Refer to the diagram at the right
and be sure to specify the paper
width and length measurements
correctly.
7 Using the 10-Key Pad, type in “150”
for the width (y).
❍ The width of the paper (y) can be
set between 90 mm and 297 mm.
❍ To correct the entered value,
press the [No] key.
8 Press the [Yes] key.
The main screen appears.
9 If necessary, specify any other copy settings.
❍ Before Making Copies (p. 5-1)
❍ Advanced Copy Operations (p. 6-1)
10 Press the [Start] key.
✎
Note
When making copies using the Manual Bypass, continue loading paper into
the tray.
x
y
x
To Next Page
Loading...
