MIR 600 - Page 15

2. Product presentation
MiR600 User Guide (en) 08/2021 - v.1.0 ©Copyright 2021: Mobile Industrial Robots A/S. 15
Pos. Description Pos. Description
detection on page84 compartment—see Internal
parts on page21
7 Front safety laser scanner—
see Obstacle detection on
page84
8 Front maintenance hatch:
opens to the front
compartment—see Internal
parts on page21
9 3D depth cameras: two pcs,
detect objects in front of the
robot— see Obstacle
detection on page84
10 Proximity sensors: eight pcs,
two in each corner behind
the corner covers—see
Obstacle detection on
page84.
11 Right side maintenance
hatch: opens to the right side
compartment—see Internal
parts on page21
12 Rear safety laser scanner—
see Obstacle detection on
page84
13 Rear maintenance hatch:
opens to the rear
compartment—see Internal
parts on page21
14 Signal light: eight pcs, two on
each corner—see Light
indicators and speakers on
page122
15 Control panel and antenna—
see Control panel on
page17
Identification label
MiR600 is delivered with an identification label mounted to the product. The identification
label identifies the product, the product serial number, and the hardware version of the
product.
The identification label of MiR600 is located in the left compartment next to the battery.