MIR 600 - Maintenance; Regular Weekly Checks and Maintenance Tasks

14. Maintenance
MiR600 User Guide (en) 08/2021 - v.1.0 ©Copyright 2021: Mobile Industrial Robots A/S. 206
14. Maintenance
The following maintenance schedules give an overview of regular cleaning and parts
replacement procedures.
It is the responsibility of the operator to perform all maintenance tasks on the robot.
The stated intervals are meant as guidelines and depend on the operating
environment and frequency of usage of the robot.
It is recommended to make a maintenance plan to make sure that all
maintenance tasks are done and that the responsible(s) are aware of their
tasks.
See the sections External parts on page14, Internal parts on page21, and
Accessing the internal parts on page39 to see where the parts mentioned in
the maintenance schedules are located and how to access them.
NOTICE
Only use approved spare parts. Contact you distributor for the list of spare
parts and the appropriate how-to guides.
Mobile Industrial Robots disclaims any and all liability if unapproved spare
parts are used. Mobile Industrial Robots cannot be held responsible for any
damages caused to the robot, accessories, or any other equipment due to use
of unapproved spare parts.
14.1 Regular weekly checks and maintenance tasks
Once a week, carry out the maintenance tasks in Table 14.1.