MIR 600 - Mounting the Nameplate

6. Getting started
MiR600 User Guide (en) 08/2021 - v.1.0 ©Copyright 2021: Mobile Industrial Robots A/S. 64
3. Check that all elements on the page have the OK status and that they have green dots on
the left.
For more information, see Hardware health in MiR Robot Reference Guide on the MiR
website.
6.9 Mounting the nameplate
Before using MiR600, you must mount its unique nameplate to it. The nameplate contains
information specific to your MiR application—see Nameplate on page17.
NOTICE
The nameplate must be mounted as described in the following steps. If
mounted incorrectly, the CEmark is invalid.