11. Commissioning
MiR600 User Guide (en) 08/2021 - v.1.0 ©Copyright 2021: Mobile Industrial Robots A/S. 162
Figure 11.20. You can select the specific parts of the robot interface that the user group has access to.
Create users
In Setup > Users, you can create new users and select:
• Which user group they belong in.
• If they are SingleDashboard users with no access to other parts of the interface than to
control the robot from a dashboard.
• If they should be allowed quick access to the interface via a four digit PIN code. We only
recommend PIN codes for users with no access to settings and safety system.
To Next Page
Loading...
