12. Usage
MiR600 User Guide (en) 08/2021 - v.1.0 ©Copyright 2021: Mobile Industrial Robots A/S. 181
1. In the robot interface, go to the map editor of the map where you want to create a
position. This is done by going to Setup > Maps and selecting Edit next to the map you
would like to work on.
2. In the Object-type drop-down menu, select Positions, and then select Draw a new
position .
3. Select where on the map you want the position to be, and choose in which direction you
want it to face.
To Next Page
Loading...
