MIR MiR250 HooK - Page 126

9. Demounting the top module
MiR250 Hook Integrator Manual (en) 12/2023 - v.3.0 ©Copyright 2021–2023: Mobile Industrial Robots A/S. 126
10 Remove the MiRHook250 top module from MiR250 with the lifting device.
11 Remove the top cover from the robot.
The top module is now removed from the robot, and you can access the area of the robot
covered by its top cover.
After completing the maintenance that required you to remove MiRHook250, you can mount the
top module again by following the guide How to mount MiR Hook 250 to MiR250. You can find this
guide on MiR Support Portal.