MIR MiR250 HooK - Unboxing; In the box; Unpacking MiR250 Hook

4. Unboxing
MiR250 Hook Integrator Manual (en) 12/2023 - v.3.0 ©Copyright 2021–2023: Mobile Industrial Robots A/S. 46
4. Unboxing
This section describes how to unbox MiR250 Hook.
To be able to use MiR250 Hook hardware version 2.0, the robot must be running software version
3.3.2 or higher.
4.1 In the box
The box contains:
l
The MiR250 Hook robot
l
Two external antennas
l
ASICKsafety laser scanner optics cover cleaning cloth
l
Four M8 lifting eye-bolts
l
A MiR250 Hook document folder with the following printed documents and materials:
l
MiR250 Hook Integrator Manual
l
The Declaration of Incorporation for your product
l
Passwords
l
Warning label
l
How to clean and test SICKsafety laser scanners
4.2 Unpacking MiR250 Hook
Keep the original packaging for future transportation of MiR250 Hook.
We recommend that two people unpack the robot.
To unpack the robot, follow these steps:
1 Place the box with the robot so that there is at least three meters of free space at the
front or the back of the box. This is necessary as the robot drives out of the box on a
ramp.