EasyManua.ls Logo

MIR MiR250 HooK - General safety precautions

MIR MiR250 HooK
195 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3. Safety
MiR250 Hook Integrator Manual (en) 12/2023 - v.3.0 ©Copyright 2021–2023: Mobile Industrial Robots A/S. 39
3.3 General safety precautions
This section contains general safety precautions.
CAUTION
Harmful electromagnetic interference might be the result of having two radio
modules transmitting at the same time. The robot is certified to have only one radio
module active at any given time.
l
Do not attach an access point or additional radio modules to the robot while it is
connected to a wireless network.
CAUTION
If the robot starts up unexpectedly, there is a risk of injury to nearby personnel or
damage to equipment.
l
Inform personnel that robots may start driving without any warning.
l
Design missions so the robot indicates to personnel that it will begin an action that
makes it move. You can, for example, use a Play sound or Show light action to
warn nearby personnel.
WARNING
If the robot is not running the correct software and is therefore not functioning
properly, the robot may collide with personnel or equipment causing injury or
damage.
l
Ensure that the robot is always running the correct software.
WARNING
The robot may drive over the feet of personnel, causing injury.
l
All personnel must be informed of the side Protective fields of the robot and be
instructed to wear safety shoes near an operating robot.

Table of Contents

Other manuals for MIR MiR250 HooK

Related product manuals