Mitel 6970 - Creating a Speed Dial softkey using the Mitel Web UI

Configuring softkeys
46
To make a speed call, tap the softkey that you have programmed with the Speed Dial
functionality.
Creating a Speed Dial softkey using the Mitel Web UI
1. Click Operation > Softkeys and XML.
2. Select from Key 1 through Key 48 on the Top keys.
or
Select from Key 1 through Key 30 on the Bottom keys.
3. In the Type field, select Speed Dial to apply to the key.
4. In the Label field, enter a label to apply to this key.
5. In the Value field, enter the phone number, extension, or speed dial prefix to apply to this key.
If you enter a speed dial prefix, you must enter the + character at the end of the prefix number
(for example, 123456+).
6. In the Line field, select a line to apply to this key. Valid values are 1 through 24.
7. (Only for the Bottom softkeys) In the state fields, check (enable) or uncheck (disable) the
states you want to apply to this softkey.
8. Click Save Settings.