Mitel 6970 - Configuring a Call Forward key using the Mitel Web UI

Mitel 6970 IP Conference Phone User Guide
71
• No Answer: Forwards incoming calls to a specified number if the call has not been an-
sweredfor the specified number of rings.
4. If configuring a forwarding number for the No Answer state, press the No. Rings field and tap
the left or right arrow button to change the desired number of rings.
5. Tap the On checkbox beside the respective Call Forward mode to enable the Call Forward
mode.
6. Tap the Save softkey to save your changes.
Configuring a Call Forward key using the Mitel Web UI
1. Click on Operation > Softkeys and XML.
2. Select from Key 1 through Key 48 on the Top keys.
or
Select from Key 1 through Key 30 on the Bottom keys.
3. In the Type field, select Call Fwd.
4. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this
softkey.
5. Click Save Settings.
Note:
1. If All, Busy and No Answer are all enabled, the All settings take precedence over Busy and
No Answer.
2. Pressing the CopyToAll key copies the call forward number of the Call Forward mode in
focus to every Call Forward mode of that account. For example, if you have the cursor pointing
at the All state and has a call forward phone number configured, pressing the CopytoAll key
assigns the same phone number to the Busy and No Answer states as well.