5. (Optional) Scroll through the list of contacts.
6. When matches are found, tap the dial icon beside the desired contact entry.
7. Tap the Close softkey to exit.
Dialing from the Contact Card
To dial a contact’s phone number.
1. Press the
(Directory) key.
2. (Optional) Tap the search bar, enter the first letters of the contact’s name to initiate the search
function.
3. Tap the contact you want to call to open his/her contact card.
4. (Optional) If the contact has multiple phone numbers defined, tap the desired number on
screen (if no external Directory sources are configured/enabled).
4. Tap the (Call) icon beside the number you wish to dial.
Local Directory features
The internal Local Directory contains the contacts that have been created or copied directly to the
phone using the phone UI. If no external directory sources are available, pressing the Directory key
will open the Local Directory menu.
From the Local Directory menu, you can search for a contact, place a call to the selected contact,
add new contacts to the Local Directory, delete all contacts, delete individual contacts, or edit existing
contacts. Users can also view contact details (e.g. title, company name, numbers, work and home
addresses, e-mail addresses, etc...).
You can also assign an individual contact ring tone to contacts in your Local Directory. Individual
contact ring tones can be used during incoming calls to help you identify the party calling. You can
select contact-specific ring tones (from the phone’s 15 preloaded as well as the 8 custom ring tones)
for respective contacts in your Local Directory, which will be played back when a call from the
respective contact is incoming.
Individual contact ring tone support is dependent on the phone’s directory lookup functionality. During
an incoming call, the Local Directory is examined against the phone number of the incoming call. If
a match is found and the contact has an associated contact ring tone, the contact ring tone is played.
To Next Page
Loading...
