Mitel 6970 - Bluetooth; MobileLink

Mitel 6970 IP Conference Phone User Guide
61
The following table describes the status conditions that can display for the account.
Bluetooth
MobileLink
The Mitel 6970 IP Conference Phone supports MobileLink, a feature that provides seamless mobile
integration using Bluetooth wireless technology. Bluetooth and MobileLink features are only available
when a user is hot-desked into the Mitel 6970 IP Conference Phone.
MobileLink highlights include the ability to:
• Sync your mobile phone’s contact list with your Mitel 6970 IP Conference Phone.
• Answer a mobile phone call using your Mitel 6970 IP Conference Phone.
• Move mobile call audio between the Mitel 6970 IP Conference Phone and your mobile phone.
The MobileLink feature requires a specific Mobile softkey (initially labelled "Connect") to be
added to the phone. For more information, see “Configuring the Mobile softkey through the Mitel
Web UI” on page 62.
To support MobileLink, the Mitel 6970 IP Conference Phone uses Bluetooth wireless technology.
The embedded Bluetooth 4.1 enables support of the MobileLink capability.
Status
Condition Description
Registered
Displays this status on accounts that HAVE been registered with the SIP
proxy server.
Example:
Line SIP Account Status Backup Registrar Used?
1 650@proxy.com:5060 Registered Yes
where:
• Account Number is 1
• SIP Account is 650@proxy.com on port 5060
• Status is Registered
• Backup registrar is used (Yes)
SIP Error
Number
Displays on accounts when registration fails with the SIP proxy server.
Example:
Line SIP Account Status Backup Registrar Used?
4 653@proxy.com:5060 401 No
where:
• Account Number is 4
• SIP Account is 653@proxy.com on port 5060
• Status is 401 - Unregistered if SIP registration fails
• Backup registrar is used (No)
Note: The MobileLink feature is supported only on iOS and Android mobile phones.