Mitsubishi Electric MELSEC iQ-F Series - Page 208

206
10 TROUBLESHOOTING
10.3 Checking the Network Status
In the following cases, the network map is displayed differently from the actual connection status.
Precautions
Stations in offline mode are not displayed in the network map. In line topology, stations connected after a station in offline
mode are not displayed because they are disconnected.
Connection status Display of the network map
Two stations are connected through an industrial switch. Branches are not displayed in the network map.
Industrial switches are in cascade connection. Only one branch is displayed.
No.1
No.0
Industrial switch
(for CC-Link IE TSN Class B)
No.1 No.2
No.3
No.0
Industrial switch
(for CC-Link IE TSN Class B)
Industrial switch
(for CC-Link IE TSN Class B)