244
10 TROUBLESHOOTING
10.6 List of Parameter Numbers
Basic Settings Communication Period
Setting
Basic Period Setting Setting in Units of 1s A100H
Communication Period Interval Setting (Do Not
Set it in Units of 1s)
A100H
Communication Period Interval Setting (Set it in
Units of 1s)
A100H
Cyclic Transmission Time A100H
Transient Transmission Time A100H
Multiple Period Setting Normal-Speed A108H
Low-Speed A108H
Connection Device Information CC-Link IE TSN Class Setting A100H
TSN HUB Setting A100H
Device Station Setting Disconnection Detection Setting A100H
Application Settings Supplementary Cyclic
Settings
Station-based Block Data Assurance A100H
I/O Maintenance
Settings
Output Hold/Clear Setting during CPU STOP A110H
Data Link Error Station Setting A110H
Output Mode upon CPU Error 7101H
Transient Transmission Group No. Transient Transmission Group No. A010H
Parameter Name Parameter Name 7310H
7311H
Module Operation Mode Module Operation Mode 7100H
Security IP Filter Settings IP Filter A03AH
IP Filter Settings Deny/Allow A03AH
IP Address A03AH
Range Setting A03AH
IP Address Excluded
from Range
A03AH
Item Parameter No.
To Next Page
Loading...
