3 CONFIGURATION OF INSTRUCTIONS
3.4 Indirect Specification
107
3
■Indirect specification and index modification
When a device is specified by both indirect specification and index modification, index modification is executed first and then
the device is specified by indirect specification.
MOV K5 Z2
ADRSET D0 D100Z2
MOV K1234 @D100Z2
Write K1234 to the address specified by D105 and
D106 (@D(100 + 5) = @D105).
Store K5 in the index register Z2.
Store the address of D0 in D105 and D106 (D(100) + 5) = D105).
To Next Page
Loading...
