Mitsubishi Electric MELSEC-Q/L - Time Data Band Comparison

7 APPLICATION INSTRUCTIONS
7.15 Clock Instructions
707
7
Time data band comparison
TZCP(P)
Processing details
• The comparison target time of two upper and lower points (hour, minute, second) is compared with the three points of time
data "hour, minute, second" starting from (S3), and depending on the result (small, within the band, large), (D), (D)+1, or
(D)+2 turns ON.
• QnUDVCPU, LCPU: The serial number (first five digits) is "16112" or later.
(S1): Start number of the devices where the lower limit values (hour, minute, second) of the comparison target time data are stored (three points occupied)
(device name)
(S2): Start number of the devices where the upper limit values (hour, minute, second) of the comparison target time data are stored (three points occupied)
(device name)
(S3): Start number of the device where the time data to be compared is stored (3 points occupied) (device name)
(D): Start bit device number to which the comparison result is output (3 points occupied) (Bit)
Setting
data
Internal device R, ZR J\ U\G Zn Constant Others
Bit Word Bit Word
(S1) 
(S2) 
(S3) 
(D) 
Basic
High
performance
Process Redundant Universal
Ver.
LCPU
Ver.
TZCPP
TZCP
TZCP
TZCPP
S1
S2
S2
D
D
S1
S3
S3
Command
Command
D
D
D
+2
+1
TZCP
S1 S2
D
S3
Contact
(Hour)
(Second)
(Minute)
(Hour)
(Second)
(Minute)
(Hour)
(Second)
(Minute)
(Hour)
(Second)
(Minute)
(Hour)
(Second)
(Minute)
(Hour)
(Second)
(Minute)
+2
S2
S2
S2
+1
+2
+1
S1
S1
S1
+2
+1
+2
+1
S1
S1
S1
+2
+1
Turns on when
Turns on when
Turns on when
(Hour)
(Second)
(Minute)
+2
S2
S2
S2
+1
S3
S3
S3
S3
S3
S3
S3
S3
S3