Mitsubishi Electric MELSEC-Q/L - Output Instructions; Out (Excluding Timers, Counters, and Annunciators)

148
5 SEQUENCE INSTRUCTIONS
5.3 Output Instructions
5.3 Output Instructions
Out (excluding timers, counters, and annunciators)
OUT
Processing details
• Operation results up to the OUT instruction are output to the designated device.
• The number of basic steps for the OUT instructions is as follows:
Operation error
• There is no operation error in the OUT instruction.
(D): Number of the device to be turned ON and OFF (bits)
Setting
data
Internal device R, ZR J\ U\G Zn Constant Others
DY
Bit Word Bit Word
(D)  (Other
than T, C,
and F)
 
Item Operation results Coil
When using bit devices OFF OFF
ON ON
Item Operation results Bit designated
When bit designation has been made for word
device
OFF 0
ON 1
Item Number of
steps
When using internal device or file register (R) 1
When using direct access output (DY) 2
When using serial number access format file register Universal model QCPU and LCPU 2
Basic model QCPU, High Performance model QCPU, Process
CPU, and Redundant CPU
3
Devices other than above 3
Basic
Process
High
performance
Redundant Universal LCPU
D0.5
Y35
OUT
Bit device number (D)
Command
Command
Word device
bit designation (D)