634
7 APPLICATION INSTRUCTIONS
7.12 Special Function Instructions
Exponent operation on floating-point data (single precision)
EXP(P)
*1 Applicable for the Universal model QCPU, LCPU.
• Returns the exponent of the value designated by (S), and stores the results of the operation at the device designated by
(D).
• Exponent operations are calculated taking the base (e) to be "2.71828".
• When an input value is set using a programming tool, a rounding error may occur. For precautions, refer to Page 89
Precautions.
• In any of the following cases, an operation error occurs, the error flag (SM0) turns ON, and an error code is stored into SD0.
*2 There are CPU modules that will not result in an operation error if -0 is specified. For details, refer to Page 87 Using single/double-
precision real number data.
• Basic model QCPU: The serial number (first five digits) is "04122" or later.
(S): Data of which the exponential value is obtained or head number of the devices where the data is stored (real number)
(D): Head number of the devices where the operation result will be stored (real number)
Setting
data
Internal device R, ZR J\ U\G Zn Constant
E
Others
Bit Word Bit Word
(S)
*1
(D)
*1
Error
code
Error details Q00J/
Q00/
Q01
QnH QnPH QnPRH QnU LCPU
4100 The operation result is not within the following range:
2
-126
| Operation result | 2
128
The operation result is not within the following range:
2
-126
| Operation result | < 2
128
The specified device value is -0.
*2
4140 The specified device value is -0, unnormalized number, nonnumeric, or .
4141 The operation result exceeds the following range.
(when an overflow occurs)
|Operation result| < 2
128
Basic
Process
High
performance
Redundant
Universal
LCPU
Ver.
Command
Command
EXPP
EXP
EXPP
EXP S D
S D
32-bit floating-point
real number
(
)
32-bit floating-point
real number
e
+1 +1
S DS D
To Next Page
Loading...
