Mitsubishi Electric MELSEC-Q/L - Select Refresh (CCOM(P))

492
7 APPLICATION INSTRUCTIONS
7.6 Structure Creation Instructions
Select refresh (CCOM(P))
CCOM(P)
Processing details
• Refer to Page 489 Select refresh (COM).
Operation error
• In any of the following cases, an operation error occurs, the error flag (SM0) turns ON, and an error code is stored into SD0.
Program example
• Turning on M0 enables the program to execute the select refresh, while turning off M0 disables the program to execute the
select refresh.
• QnU(D)(H)CPU, QnUDE(H)CPU: the serial number (first five digits) is "10102" or later
• Q00UJCPU, Q00UCPU, Q01UCPU, QnUDVCPU: Supported
Setting
data
Internal device R, ZR J\ U\G Zn Constant Others
Bit Word Bit Word

Error
code
Error details Q00J/
Q00/
Q01
QnH QnPH QnPRH QnU LCPU
4100 The CCOM(P) instruction was executed in the QnU(D)(H)CPU whose serial
number (first five digits) is "10101" or earlier.

[Ladder Mode] [List Mode]
Basic
High
performance
Process Redundant Universal LCPU
Ver.
CCOM
CCOMP
CCOM
CCOMP
Command
Command
Step
Instruction
Device