Mitsubishi Electric MELSEC-Q/L - Page 161

5 SEQUENCE INSTRUCTIONS
5.3 Output Instructions
159
5
Program example
• The following program sets Y8B (ON) when X8 goes ON, and resets Y8B (OFF) when X9 goes ON.
• The following program sets the value of D0 bit 5 (b5) to 1 when X8 goes ON, and set the bit value to 0 when X9 goes ON.
[Ladder Mode] [List Mode]
[Ladder Mode] [List Mode]
Step
Instruction
Device
B0
D0
B5
Sets b5 of D0 at 1.
Sets b5 of D0 at 0.
Step
Instruction
Device