188
6 BASIC INSTRUCTIONS
6.1 Comparison Operation Instructions
• The following program compares the data at X0 to XF with the data at D3, and turns Y33 ON if the data is identical.
• The following program compares BIN value K100 to the data at D3, and establishes continuity if the data in D3 is something
other than 100.
• The following program compares the BIN value 100 with the data at D3, and establishes continuity if the D3 data is less
than 100.
• The following program compares the data in D0 and D3, and if the data in D0 is equal to or less than the data in D3,
establishes continuity.
[Ladder Mode] [List Mode]
[Ladder Mode] [List Mode]
[Ladder Mode] [List Mode]
[Ladder Mode] [List Mode]
Step
Instruction
Device
To Next Page
Loading...
