Mitsubishi Electric MELSEC-Q/L - Page 221

6 BASIC INSTRUCTIONS
6.1 Comparison Operation Instructions
219
6
Program example
• Program that compares the values of D0 to D3 with the lower limit value (E-1.23) and upper limit value (E1.23).
[Ladder Mode]
Compare D0 to D3 with lower limit value (E-1.23)
and upper limit value (E1.23).
M0 turns on when E-1.23 > D0 to D3.
M1 turns on when E-1.23 ≤ D0 to D3 ≤ E1.23.
M2 turns on when D0 to D3 > E1.23.