24
2 INSTRUCTION TABLES
2.2 How to Read Instruction Tables
Indicates the type of processing that is performed by individual instructions.
Indicates execution conditions for individual instructions.
Execution condition Non-conditional
execution
Executed at ON Executed at the
rising edge
Executed at OFF Executed at the
falling edge
Recorded code No symbol recorded
For execution conditions, refer to Page 117 Conditions for Execution of Instructions.
Indicates the basic number of steps for individual instructions.
See Page 118 Counting Step Number for a description of the number of steps.
The ● mark indicates instructions for which subset processing is possible.
See Page 108 Reducing Instruction Processing Time for details on subset processing.
Indicates the page numbers where the individual instructions are explained.
(D)+(S) (D)
Indicates 16 bits.
(D+1, D) +(S+1, S) (D +1,D)
Indicates 32 bits.
16 bits
D+1 D
Upper 16 bits Lower 16 bits
16 bits
To Next Page
Loading...
