268
6 BASIC INSTRUCTIONS
6.2 Arithmetic Operation Instructions
• The following program adds 1 to the data at D0 and D1 when X0 is ON.
• The following program adds 1 to the data set at X10 to X27 when X0 goes ON, and stores the result at D3 and D4.
• The following program subtracts 1 from the data at D0 and D1 when X0 goes ON.
• The following program subtracts 1 from the data set at X10 to X27 when X0 goes ON, and stores the result at D3 and D4.
[Ladder Mode] [List Mode]
[Ladder Mode] [List Mode]
[Ladder Mode] [List Mode]
[Ladder Mode] [List Mode]
To Next Page
Loading...
