298
6 BASIC INSTRUCTIONS
6.4 Data Transfer Instructions
• The following program stores input data from X0 to XB at D8.
• The following program stores the constant K155 at D8 when X8 goes ON.
• The following program stores the data from D0 and D1 at D7 and D8.
• The following program stores the data from X0 to X1F at D0 and D1.
[Ladder Mode] [List Mode]
[Ladder Mode] [List Mode]
[Ladder Mode] [List Mode]
D8
1
00
1
00000000
1
0
11
b15 b8b7 b0
009BH
[List Mode][Ladder Mode]
Step
Instruction
Device
Step
Instruction
Device
To Next Page
Loading...
