Mitsubishi Electric MELSEC-Q/L - Page 305

6 BASIC INSTRUCTIONS
6.4 Data Transfer Instructions
303
6
Operation error
• In any of the following cases, an operation error occurs, the error flag (SM0) turns on, and an error code is stored in SD0.
Program example
• The character string data stored in D10 to D12 is transferred to D20 to D22 when X0 goes ON.
• When X0 is turned ON, the character string "ABCD" is transferred to D20 and D22.
Error
code
Error details Q00J/
Q00/
Q01
QnH QnPH QnPRH QnU LCPU
4101 There is no NULL code "00H" within the range of the corresponding devices
starting from the device number specified by (S).
The entire character string cannot be stored in the points between the device
number specified by (D) and the last device number of the corresponding
device.
The character string of (S) exceeds 16383 characters.

[Ladder Mode] [List Mode]
[Operation]
[Ladder Mode] [List Mode]
Step
Instruction
Device
b15 b8 b7 b0
D21
D22
D20
b15 b8 b7 b0
D11
D12
D10
4D
H
(M)2A
H
( * )
45
H
(E)45
H
(E)
00
H
4D
H
(M)2A
H
( * )
45
H
(E)45
H
(E)
00
H
Step
Instruction
Device